Hausn Three-Joint Desk-Clamp Phone Holder 55 cm Charcoal

Overview

This charcoal phone holder uses an aluminum desk clamp, two rigid arm sections, three locking joints, and a padded spring cradle. Its assembled reach is approximately 55 cm, and the clamp fits compatible flat desk edges from 1.5 to 5 cm thick.

Specifications

• Arms: 2 powder-coated aluminum sections
• Assembled Reach: Approx. 55 cm from clamp pivot to cradle
• Clamp: Aluminum frame with steel screw and swivel pad
• Supported Desk Thickness: Approx. 1.5-5 cm
• Clamp Throat Depth: Approx. 5.5 cm
• Locking Joints: Exactly 3: lower pivot, centre elbow, and cradle ball joint
• Supported Device Width: Approx. 6-9.6 cm
• Supported Device Thickness: Up to 14 mm including case
• Cradle: Spring-loaded ABS jaws with 4 silicone pads
• Suggested Static Load: Maximum 0.5 kg with the arm kept compact
• Power: Non-charging; no battery, coil, cable, or adapter
• Product Net Weight: Approx. 0.93 kg

Installation, Use, and Safety

• Use only on a stable, flat, undamaged edge within the stated range; do not clamp to glass, brittle, hollow, bevelled, weak, or valuable finished edges
• Seat the clamp fully, tighten by hand without crushing the surface, and set and lock all three joints while empty
• Remove the phone before changing any joint, clamp, orientation, or holder position
• Centre the phone inside all four pads, keep cables slack, keep the arms compact, and recheck every lock periodically
• Stop use if the clamp, screw, pad, edge, arm, pivot, elbow, ball joint, lock, cradle, spring, jaw, or connection is cracked, loose, bent, detached, slipping, or unstable

Package Includes

• 1 x charcoal aluminum desk clamp with screw and pressure pad
• 2 x charcoal aluminum arm sections
• 1 x lower locking pivot
• 1 x centre locking elbow
• 1 x padded spring cradle with locking ball joint
• 1 x 4 mm hex key
• 1 x installation guide

Phone, case, desk, charging cable, charger, extra surface pads, and accessories are not included.